Sewing for my son, 1 piece pajama

Ever since I became a parent my desire to sew has increased.  There are sooooo much things you can make for your children, the possibilities are endless.  In fact, its actually more difficult to actually be able to narrow it down.  Unfortunately, if you have a son, the clothing options are pretty limited.  Yes there are bloggers who make a ton of stuff for boys, but I find its just many different variations of the same thing.  That's also where I am stuck.  His pajama drawer is full and he doesn't have a preference for stuffed animals so I haven't really gone there.  So what's left? More pajamas!  And I sweatshirt too I suppose,  but that will be for another time :-)

Anyway, he grew out of his only 1 piece pajama and it was vintage :-(  I decided I would try to remake it by laying the old pajama on some new fabric.

The old pajama looks more red then pink in real life by it was dark so I guess the camera went wonky.

Anyway, the pajama is 4 pieces plus ribbing around the neck, wrist and ankle.  Couldn't be too hard to replicate right?  I laid it down and just cut around the left side first, then duplicated that to get the right side.  The sleeves were harder for some reason, I waisted fabric because I couldn't get the shape right.  I eventually got it, so good thing there was fabric to spare.

The first side of the pajama.  I duplicated this.

The sleeves

The first step is to sew the back together, then up the front a little, followed by the legs.

This is just the back sewn up.  The next step is to sew a bit up the front from the bottom of where the legs start.

This shows the front sewn up a bit, and then the legs.

I didn't get any other pictures of the construction because I went into full sewing mode.  Next I sewed the shoulder seams.  After that I added the ribbing to the wrists of each sleeve and sewed the sleeves with right sides together.  The sleeves need to be set in so I did that.  Then I added the zipper, which was the tricky part.  I had to really inspect the original pajama to really get it.  It took a bit of sewing and unpicking, but I finally got it to a place where I decided enough was enough, ha.  After the zipper was placed in the ribbing around the neck, I moved on to the final step.  This was adding ribbing to the ankles and it was done.  I started this at around 7:30pm, which is my little guys bed time and I was finished by about 9:30 p.m.  I used both my serger and regular machine.  It didn't take too long so I encourage you to definitely try recreating something of your own too :-)

It ended up being much bigger then I anticipated so I am glad it will last the rest of the colder  months :-)  He pushed the sleeves up on his own,  I guess he has his own styling ideas.

Until next time!

Latest toddler pajama upcycle

HI HI!

I haven't updated the blog in a little bit, but I have been busy.  There seems like theres a lot going on in my world, but I doubt its really a lot.  You know how that is, you seem busy but if someone were to ask you, you'd realize you're not really doing much? Anyway! Most of what I am doing is sewing related.  Even right now, I decided to take a few minutes and come here instead of working on what I am supposed to be doing ;-)
To the point! A week or so ago I gathered a few items from the purge pile and decided to redo them.  I grabbed 4 items to kind of mix and match to make some pajamas and maybe something else.  I haven't decided yet on the last little cardigan, what it will become.

Here I have a thermal skirt.... Yeah a thermal skirt, which is confusing in itself.  A navy short sleeve t-shirt in a mens medium I believe.  A long sleeve striped shirt in woman large and a size small cardigan.

Here is what I have made so far

Out of 3 adult size clothing, I was able to reconstruct them into 5 preschooler sized clothing!  

All I need is some inspiration as to what to do with the cardigan.... I'm thinking a cardigan in a smaller size for my little guy.  Not a huge job, but that's all I've got!

Okay, I gotta get back to sewing!  Until next time <3

Hoodie upcycle

Today I worked on another upcycle of my favorite kind.  A Sweat shirt upcycle!  It also turned into something practical no less!  I had this tinker bell hoodie that I got when I went to Disney land several years ago.  I haven't worn it for a few years but I could never bring myself to let go of it in our many purges.  Usually we do a yearly purge of things that we don't need and give them to local thrift stores and such.  Anyway, this hoodie made it through at LEAST 6 rounds of purging!  Now that we are possibly on the cusp of yet another move, I felt the need to purge items again and this time the hoodie made it into the box :-/  Luckily we had been busy this weekend, it being my 28th birthday and all, so the boxes did not get dropped off.  Last night happened to be the night when inspiration struck.  I thought "DUH! I can make it into pajamas for my little guy!"  Yes it's tinker bell, but still.  The graphics are such that I don't think you can really tell immediately that its tinker bell :-)  Anyway, tell me what you think :-D

It was a zip up hoodie so the first step was to remove the zipper.  Then I just used a satin stitch all the way up to close the front so that it joined together.  There was a small overlap so I'm an hoping this holds up in the wash :-)  Then I cut the sleeves off and those became the pant legs.  It was a raglan hoodie so thats why I there is a ton of length in the legs.  The front back and sleeves where cut from the main body of the hoodie and I had to make sure to cut everything out perfect because there was no room for error.  I think it turned out great!

If you are wondering more on how it did it, feel free to check out my last post where I took pictures of the process here.

Until next time!

Fall Vegetable Curry

Yay for meatless Monday!

I am so excited to share my meatless monday meal with you today.  It's a curry that is perfect for fall and completely vegetarian.

My home made vegetable stock

What you will need

2 tablespoons of butter
1 cup of chopped onion
2 large cloves of garlic minced
1 inch of ginger minced
2-3 tablespoons of garam masala
1 table spoon of tomato paste
2 cup of vegetable stock
1 cup of coconut milk
1 teaspoon of salt
1/4 teaspoon of black pepper
a pinch of sugar (leave this out if you don't LOVE sweet curries like me)
2 cups of carrot

The fall vegetables

1 cup of Sweet potato
1 cup Butternut Squash
1 small Red Potato
1 can of garbonzo beans rinsed throughly with cold water
1 table spoon of lemon juice
half a cup of chopped parsley with some reserved for garnish

First I melted the butter in a pot and added my chopped onion.  I turned up the heat to high so I could brown the onion.  Browning took about 7 minutes or so.  I stood and watched stirring occasionally to make sure they were all evenly golden.  Next I added the garlic and ginger and stirred to release all the flavors, about 1 minute.  Then I added the garam masala and stirred that for just a few seconds before adding the tomato paste.  I stirred the tomato paste a little to get it all combined before adding the vegetable stock.  Once the vegetable stock is all stirred with the spices I added the coconut milk followed by the salt, pepper and sugar.  Bring it to a boil and lower heat so that it continues a low boil.  I left it to lightly boil for about 15 minutes because I wanted it to reduce a little before I added my veggies.  Once it was slightly reduced I added my vegetables and simmered that for another 10 minutes.  It is finished when you can pierce the vegetables and the fork goes in with little effort.  Finally I added the garbonzo beans, lemon juice, and cilantro and stir to incorporate the flavors of the last ingredients.  Serve it up with a side of rice and enjoy!

I am throughly pleased with this curry, it was lazy, single pot deliciousness!

Up - Cycle shirt to pajamas

Today has been a pretty awesome day.  I got up early, did my laundry, made my meal plan, tidied and some how I still had some time to sew!  I was recently at a friends house and she is moving so she had a lot of clothes she was getting rid of.  I love when people think of me when they are getting rid of clothing, because I LOVE to upcycle items.  I am always on the look out for large shirts that are a nice knit material because it's always so soft.  I picked this shirt out without a project in mind and today I pulled it out with the intention of making a cardigan which quickly changed to a full pajama set for my son.  I started out with the pants and when I was done I looked at the remains and wondered if I could get a top out of it as well.  I'm glad I tried because it worked out wonderfully!  Here is my process.

First I cut the sleeves off, these will become the legs of the pajama pants.

Then I lined it up to create the front and back panels

Now its cut.  In hind shight, I would cut the panels longer and straight across.  Sew those together and then attach the legs to that.

No matter, it worked out the way I did it.  I overlocked it all together and prepared the elastic.  I just sewed the pants to the elastic while stretching the elastic slightly so it was all eased in.

Once that is attached.  I moved on to the shirt.

For the shirt I just placed one of his current t shirts on top of the shirt and only cut the front portion.  This is because I moved the shirt down an inch from the shoulder seam of the original shirt.  Doing this will make the neck hole smaller, which is what I wanted since it is a smaller shirt.

Then once the front is cut out I moved it up to align it back up with the seam of the shirt and cut all along the smaller shirt.

For the sleeves of the small shirt I opened up the shirt and aligned it like so.  The sleeves are made of the sides of the bigger shirt.  I hope that makes sense.  I placed new front and back touching and cut along that curve to create the sleeve.

Once everything was cut out I started constructing the shirt.  First I sewed up the shoulder seams with the front and the back of the shirt right sides together.  Then I added the sleeves all along the curve of the shoulder seam.  Finally I sewed all the way up the sides, continuing on to the arm pit of the sleeve and out to the wrist.

Here is the finished product!

He has already fallen in some dirt, not 10 minutes after putting it on.

The last time I made my little guy pajamas was before his second birthday.  Those are getting a little short on the legs so I'm glad I can make him some new ones.

I didn't bother hemming up the shirt or the sleeves because knits are awesome and don't unravel!
If I was to hem them up I would have used a twin needle to get that nice double line of stitching ready to wear clothing has.

Do you free sew?

So lately, I have been pretty much JUST sewing for work.  I do sewing for the local area so it's all alterations and hemming and I've been kind of burned out.  I have tried to sew a few things for myself but I just can't seem to hold my patience with anything.  I even forced myself to cut out a pattern and fit a shirt for myself.  I started cutting it on some vintage gingham fabric and realized I really should stop because I was cutting pretty recklessly!  So without cleaning up that mess I looked at my fabric scraps and I had a ton of scraps left over from a reupholster job I did a few months ago.  I knew I didn't want to throw them away, but I didn't have any ideas as to what I could do with it.  I mean, I already made some oven mittens out of some of it, so I just started putting it together with out any plan.  I started to free sew.

Free sewing is just like free writing, or doodling, or riffing on a guitar.  It's just letting it flow, you know?  I didn't look at the time, or anything, just joined 2 pieces here and a few more pieces there.  I did lay some out so I could make larger squares kind of crazy quilt style.  I did top stitching with thread from the vintage wooden spools.  I kept going and emptied all the tread on quarter threaded bobbins.  It was wonderful.  Just sewing without any pressure, or plan.  I honestly can't say that I have done that really.  I do a lot of just cut and go and figure it out along the way, but there's still that pressure of wanting a product at the end.  This was much more free.  I didn't have to worry about the size of the pieces or anything.  I did put it all together with what I had so far so here it is.

I already find myself wondering what else I will do with it.  Who knows, maybe nothing.  I guess that's the beauty of it.  Do you free sew? I would love to see what you have done.  :-)

Custom bugaboo cameleon hood tutorial

My most popular post is the Kinda tutorial I did for the Custom Bugaboo Cameleon hood.  I have since made an effort to take better photos of other hoods that I have done.

So anyway here is what I have compiled.

First of all, there are different kinds of hoods you can make.  I have done a single layer canopy, as well is the most common and they way the actual bugaboo hoods are made, double layer canopy.  The single layer canopy is awesome because you can use less fabric!  I will post both ways for you here :-)

What you will need besides sewing machine and thread:

Fabric: 2.5  yards           double wide bias binding
Pins                                1/4" elastic
Scissors

*For a hood with 2 layers with a print and a coordinating solid I would get 1.5 yards of the print and 1 yard of the solid.  I only had a yard of the print though, and I made it work so you can get away with just a yard of each, equaling just 2 yards of fabric total.

Step 1: Create your template.  I did this by placing my fabric over my current hood and pinned it into place.

In this photo I am going to trace the back panel of the canopy.  I draped my fabric, pinned it down, and with a water soluble pen, marked along the seams by feeling along the whole seam and staying in that little groove.  When I cut it out, I cut about a quarter of an inch away from the line that I drew.

After the back panel was cut out I did the same with the front panel.  In the front I did fold the fabric under so I got a nice exact fit and marked all along the seam and the edge of the front of the canopy.  Again, I used a water soluble pen so with a little water it comes right off.  I cut a quarter inch away from line again.

Once those 2 pieces are cut out,  used what was left on my fabric to trace the back piece that wraps around the top of the seat.  I used the same method and marked in the seam lines while the hood was on the seat.  I cut out my piece, making sure to leave a quarter inch seam allowance away from the line i marked.

Now its time to cut the second layer of fabric.  This is going to my underside of the hood.  My print is on the outside and the solid is on the inside.  For this I place my panels on top of my solid lining fabric and just cut the same exact shapes out.  The panel with the point edge is the back and the panel with the rounded edge is the front panel.

Now you need to cut the stripes that the plastic of the canopy will be inserted into to give the hood its shape. For this you will use the solid fabric, or under layer fabric.  It is important that you cut along the curve of the front panel.

 I didn't do that to begin with and cut straight strips.  That was a mistake.  The strips need to be curved along the curve of the canopy.  I just used one side and marked each strip to be 2 inches wide and 5 inches shorted then the end of the hood.   This will insure they lay flat with you sew them on.
Now everything you need is cut out and you can begin your sewing.  First I sewed the ends of my strips by folding over twice.

Once all your strips have nice sewn edges, go ahead and sew them to the inside panel on each side.  First I sewed the the outside edges with non matching thread because it wont be visible and then I sewed the inside edges.  The inside edges will be seen, so the top stitch thread should match well.

After the strips that make the casings are top stitched down you put the right sides together like so and sew along one edge.  I sewed along the side with will be joined to the back panel.

This is where I got sew happy and didn't take any pictures.  So I made sure to take pictures of a different hood I was making to better describe the process :-)  Below is how the one side is sewn rights sides together and one edge is left free.

 Flip it so right side are out and the wrong sides are together.

 Do the same process for the other side along the seam that will join the front and back panel and this is what you get.  A good pressing of those seams so they lay flat will help with the next step.

Once they are pressed and laying flat, go ahead and line those up and sew that together.

Next step is the bias binding.  First you will want to bind the little back piece that holds the canopy to the back of the seat.  Sew the binding all along the bottom.  You can go ahead and line that up with the back of the canopy and sew with the right sides together.

Now you will bind the inside seam of the canopy all along the inside of the hood.  That will incase the edges inside and make it pretty.  From there you are ready to start the bias binding going all the way round the canopy.

When you start the bias binding you will start from the back and encase the raw edge that holds the canopy to the seat.  Start there and work your way around the canopy until you get to where you will sew the elastic in.  Mark the spots on your binding and sew the elastic to the binding and then proceed to attach the binding the rest of the way across the front of the canopy.  Do the same with the other side when you come close to where the elastic needs to be attached.

Now you are done!

So, if you want to make a single layer canopy you just sew the encasing strips to the canopy and thats the only difference.

You can just barely see the line of stitching for the casings.  Personally I prefer the single layer because its quick and easy and using half the fabric!

I hope you enjoyed this post, please feel free to ask any questions is something isn't quite clear. :-)